In recent years, business is not as good as before, and the business situation of all walks of life is not ideal. No matter what industry competition is very fierce, just like in recent years, the silica gel products industry, after many twists and turns, successfully escaped from the dangerous period, doubled the single price of raw materials in the previous two years, and left behind is the downstream oil pressure, Liquid manufacturers are struggling like dead fish, so many manufacturers may have never considered saving from cost control before. However, many silicone rubber manufacturers began to pay attention to this problem because of the environmental protection and price adjustment raided in 17 years. When it comes to cost, what can you control, but not those costs?

The cost can be controlled from any place, such as packaging bags, mold washing water, rubber, various tools, etc., but we should first take a good general direction and focus on it. First of all, for the raw materials of silica gel, if the raw edge of the product can be controlled to 1% and there is no defect rate in the molding process, the estimated raw materials can be processed by more than 10%, especially for some large-scale silica gel products, protective covers, silica gel kitchenware, etc., that is, there should be no shortage of materials, and there should be no waste of raw materials, So for the control of the general direction of raw materials and products, we have to make a plan in the early stage, which method is the most economical and efficient.

In addition, the secondary utilization of raw materials must be done well. Products with matching color and hardness do not need to use new materials. Besides raw materials, the most important thing is the machine start-up and labor costs. The company's electricity bill is one of the highest consumption, while the electricity bill of silicone rubber products manufacturers can reach 2500 yuan 24 hours a day, So in the process of heating the upper and lower mold, it is the most expensive to burn electricity. If you stop a machine and do not turn off the power temperature, then the money will be wasted. Therefore, most manufacturers have a certain order quantity for customized products, which is officially related to these reasons.

In fact, the control of finished products is not a conclusion that can be drawn in one day or two. If a silicone product manufacturer saves 10 kwh of electricity every day, it will be 300 kwh in one month, and that 10 machines will be 3000 kwh in one month. It can be thought that tens of thousands of electricity bills will be saved for you in one year. The same is true for other work necessities. There is no change in one or two days, After a long time, you may be scared yourself.

Also speaking of the current industry, if a silicone product manufacturer can't make money in terms of product profit and output, it is still maintaining, then it may be that internal cost control is better, but now the silicone industry can only survive from the aspects of output and cost control, relying on the internal methods. We should all understand the reasons!